Apr 23, 2025 · EGR Valve Position/Duty Cycle: At idle and low load: The EGR valve is normally partially open, allowing a small amount of exhaust gas to recirculate into the intake manifold to lower …

Jan 1, 2018 · The EGR valve is much easier to remove compared to the EGR cooler. Next time I swap EGR coolers I'll try an Oxi-clean only cleaning. Oxi-clean does such a tremendous job that I wouldn't …

Jan 14, 2019 · 1. INSTALL EGR PIPE WITH COOLER SUB-ASSEMBLY (a) Using an E8 "TORX" socket wrench, install the 3 stud bolts to the EGR pipe with cooler sub-assembly.

Jan 18, 2009 · After looking at about 10-15 different threads about deleting the EGR and finally figuring everything out, I decided to put together this "EGR Delete" How To so the next guy doesn't have to …

Jul 13, 2014 · I recently completed my engine build and deleted my EGR in the process to make clearance for the return fuel system using a 2.9L Whipple. The EGR is in the way of the rear fuel …

Jan 21, 2019 · Clean EGR circuit (EGR pipe, valve, cooler) Due to short timing, I decided to replace with new EGR valve and cooler Clean air intake manifold Clean throttle body Replace PCV valve Clean …

Aug 25, 2013 · The videos on the DIY service for the EGR, EGR cooler and intake manifold often suggest buying replacements and take your time thoroughly cleaning the originals rather than trying …

REMOVE EGR COOLER SUB-ASSEMBLY Disconnect the connector, wire harness clamp and 4 water hoses. Remove the 4 nuts and bolt. Text in Illustration *1 Stud Bolt and Nut Using an E8 "TORX" …

Jul 14, 2022 · An egr that is causing sluggish slow speed operation is stuck open without egr cooler clogging. Normally the egr valve is closed in low speed operation. The "Car Care Nut" youtube …

May 7, 2025 · 2010 Prius still shakes after head gasket job and EGR + intake cleaning Discussion in ' Gen 3 Prius Care, Maintenance & Troubleshooting ' started by infinitepub, May 7, 2025.